INSTALLATION INSTRUCTIONS

1) Start with a straight line where the mirror can rest; starting from the bottom to the top.
2) In the back of the mirror put the glue 2” from each corner and one in the center.
3) Instal the mirror on to the wall or surface one next to the other with out any space between. If you decide to leave a space you will need to put grout in between after you remove the blue tape. This will not give you a seamless look.
4) As you progress, stick blue tape on each mirror to hold and to be remove 24h later. See blue strips on diagram below

MATERIALS NEEDED FOR THE INSTALLATION

1) Silicone glue, CRL RTV408 Clear Neutral Cure Silicone.
2) Blue Tape ScotchBlue 1.41 in. x 60 yds. Original Multi-Surface Painter's Tape.
*3) Should you decide to cut the mirror, you will need to buy a glass cuter: Amazon or Home Depot. Please be careful, all edges are sharp! If you need to install a bracket you will need a diamond drill bit for glass.
4) If you reside in a rental space; you can buy the Gorilla Double Sided Tape, so that you can remove the mirror when you decide to move out.
* ATTENTION It is strongly recomended to hire a professional for all work and cutting installations. L’Atelier MB is not responsible for any results from all above recommendations

HOW TO: CALCULATE THE QUANTITY OF TILES YOU NEED

STEP 1 Measure your area in inches both length & height

STEP 2 Multiply the length x height (this will give you square inches)

STEP 3 Divide the square inches by 144

STEP 4 Calculate the overage. You should never just buy the amount of tile you need. You also need to calculate for cuts, waste and breaks. Multiply the square footage of the room by 10%. Then add this amount to the total square footage of the room.This is the total amount of square footage you should buy in tile.

STEP 5 To translate the square footage in to the amount of tile you need:Divide the total square footage of the room by the total square footage of the tile you have.